Things You Should Know in Cleaning Your Oil Tanks with Sandblasting

Post date:



The cleaning of oil tanks is an essential process of maintaining cleanliness, as well as safety in the storage of fuel. Among the most efficient techniques in this context is sandblasting. Sandblasting is the most effective cleaning method especially when it comes to cleaning large components or machinery which require precision and safety considerations. Here are steps that will help you understand how sandblasting can be used to clean oil tanks.

Safety Precautions

Specifically, you should always make sure you are safe before starting the sandblasting process. Before starting the process make sure that you have all the necessary equipment including your personal protection equipment. Maintain a sufficient ventilation system in the work area to lessen the possibility of breathing in dust and other particles. Additionally, confirm that the oil tank is empty and free of any flammable fumes or oil drips. It is also advisable to have fire fighting extinguishers placed in those areas in case of any incidence.

Preparation of the Oil Tank

Safety precautions are crucial while sandblasting, and being well-prepared is the greatest way to guarantee your safety. First, unhook any lines that might be attached to the tank and open the valves to empty them. It could be essential to empty the tank by hand to remove any residue or liquid that remains to guarantee that it is clean. To prevent sand from being transported inside during the blasting process, make sure that all access points to the blasting zones are sealed. To make cleaning of larger tanks easier, it might be more effective to divide the tank.

The Sandblasting Process

Start sandblasting using the equipment that must be set to the right pressure level. Begin with a low pressure and build up to the optimum pressure as required. Keep the nozzle at the same distance—ideally between 6 and 12 inches—from the tank’s surface. This can be accomplished by brushing the nozzle across the surfaces to distribute the solution uniformly. Especially focus on the regions that have a thick layer of rust or debris. Additionally, read now about the sandblasting by visiting the link.

Post-Sandblasting Care

Finally, after sandblasting, it is advisable to look for any regions that might have been left with contaminants or any other areas that were not blasted. After that, use compressed air or vacuum to clean the tank and free it of any abrasive material that might remain on its surface. If needed, use a rust inhibitor or apply a primer onto the surface that has been cleaned to prevent corrosion. If any part has come off, reconnect it and make sure that the tank has been closed and is ready for use.

Benefits of Sandblasting

Let’s now see some added benefits of sandblasting that it has when cleaning large equipment. Sandblasting is an effective technique for surface cleaning. Following sandblasting, the coating’s surface adherence is improved. Sandblasting is another method that extends the life of the oil tank. Sandblasting helps get rid of dirt and corrosion from the tank’s outside while also ensuring its structural integrity.


Sandblasting of oil tanks is a reliable method of cleaning, but it requires preparation and compliance with necessary safety measures. By following them, you can guarantee that your oil tanks are cleaned properly and without risking your safety, which will eventually prolong their durability and effectiveness.




Randy is an entrepreneur with a diverse background in business. She has worked in the corporate world for many years, but always had a desire to start her own company. After taking some time off to raise her children, she finally decided to take the plunge and start her own business. Randy is passionate about helping others, and she hopes to inspire other women to pursue their dreams.